Kenwood NX-1000 Series User Manual page 72

PRIORITY SCAN
A Priority channel must be programmed in order for Priority Scan to function.
When using a single Priority channel, the transceiver will automatically change to
the Priority channel when a call is received on it, even if a call is being received on
a normal channel.
When using dual Priority channels, Priority channel 1 is given precedence over
Priority channel 2. So, if a call is received on Priority channel 1 while a call is
already on Priority channel 2, the transceiver will automatically change to Priority
channel 1.
• The " " indicator appears on the display when the channel is Priority
channel.
SCAN REVERT
The Scan Revert channel is the channel selected when you press the PTT switch
to transmit during scan. Your dealer can program one of the following Scan Revert
channels:
Selected: The last channel selected is assigned as the new revert channel.
•
• Selected + Talkback: If the channel has been changed, the newly selected
channel is assigned as the new revert channel. The transceiver "talks back" on
the current channel.
Priority 1/ Priority 2: If your dealer has programmed a Priority channel (either
•
Priority 1 or Priority 2), this channel is the revert zone-channel.
Priority 1 + Talkback/ Priority 2 + Talkback: If your dealer has programmed
•
a Priority channel (either Priority 1 or Priority 2), this channel is the revert
zone-channel. The transceiver "talks back" on the current receive channel.
• Last Called + Selected: The last channel on which you received a call is
assigned as the new revert channel. The transceiver "talks back" on the
current channel. If the channel has been changed, the newly selected channel
is assigned as the new revert channel.
72