Kenwood NX-1000 Series User Manual page 62

Send the GPS Data
Allows you to send your positioning data to the base station when the GPS unit
has been installed.
• When the power is turned ON and/ or the reception condition of the GPS
satellite is poor, positioning may take longer to complete.
PF Button:
Press the programmed button to send GPS data.
Menu Mode:
Select "SEND GPS" and press the [ S ] button to send GPS data.
• When GPS data transmission is completed and "COMPLETE" is displayed for
1 second.
Short Message
Allows you to send short messages such as an address, telephone number, etc.
1 PF Button:
Press the programmed button to enter Short Message Mode.
Menu Mode:
Select "SDM MODE" and press the [ S ] button to enter Short Message Mode.
2 Press the [ <B ] and [ C> ] buttons to select a Short Message from the list
(NXDN/ DMR).
3 Press the PTT switch to send short messages.
Speaker Attenuation
Temporarily reduce the volume level of the speaker of the transceiver and
speaker/ microphone.
PF Button:
Press the programmed button to change the Speaker Attenuation On or Off.
[Analog/ NXDN/ DMR]
[NXDN/ DMR]
[Analog/ NXDN/ DMR]
62