Kenwood NX-1000 Series User Manual page 70

For details on functions that are not included in "FUNCTIONS OVERVIEW"
26} and "FUNCTION DESCRIPTIONS", please consult your dealer.
If the transceiver is password protected, "PASSWORD" will appear on the
display when the power is turned on. To unlock the transceiver, enter the correct
password.
1 Press the button programmed as [Transceiver Password] to enter Transceiver
Password Mode.
Alternatively, press the button programmed as [Menu] to enter Transceiver
•
Password Mode using the Menu Mode.
If a password has been registered and the [Transceiver Password]
•
function has not been programmed to a button or configured to the menu,
the transceiver enters Transceiver Password Mode when the power is
turned on.
2 Enter a number using the [ <B and [ C> ] buttons.
3 Press the [ S ] button to accept the number.
4
Repeat steps 2 and 3 to enter the entire password.
• Press the [ A ] button to delete an incorrectly entered number. Press and
hold the [ A ] button to delete all numbers.
5 Press the [ S ] button to confirm the entry.
• If you enter an incorrect password, an error tone sounds and the
transceiver remains locked, the transceiver will return to "PASSWORD"
display.
• The password can contain a maximum of 6 digits.
FUNCTION DESCRIPTIONS
TRANSCEIVER PASSWORD
70
{page