Package Check List; Nemo10 Product Specification - Sena NEMO10 User Manual

Table of Contents

Advertisement

1.2 Package Check List

NEMO10
NEMO10 DIL module
NEMO10-SK
- NEMO10 DIL module
- Carrier board for the NEMO10
- 110V or 230V Power supply adapter
- Ethernet CAT5 cable
- Serial console/data cable
- CD-ROM for the Users manual and software such as HelloDevice Manager and Serial/IP

1.3 NEMO10 Product Specification

Hardware
Serial Interface
Network Interfaces
Protocols
Security
Management
External interface
Power
Environmental
Physical
properties
Processor
80C51 8-bit microprocessor
Memory
32KB SRAM, 64KB EEPROM
Built-in UART
Serial speeds 1200bps to 115.2kbps
Flow Control: None, Hardware RTS/CTS
Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND
10 Base-T Ethernet interface
Supports static and dynamic IP address
ARP, IP/ICMP, TCP, Telnet, DHCP client, PPPoE
User ID & Password
Telnet or serial console port or HelloDevice Manager
Full-featured system status display
24-pin external interface
Serial interface
Ethernet interface
LED interface
Switch interface
Power supply interface
Others
Supply voltage
5VDC +/- 10%
Supply current
60mA @ 5VDC
Operating temperature: 0 ~ 50
Storage temperature: -20 ~ 66
Humidity : 90% (Non-condensing)
Dimension
45 mm L (1.8 in.) * 45 mm W (1.8 in.) * 18.5 mm H (0.7 in.)
o
C
o
C
6
TM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nemo10-sk

Table of Contents