Penn Elcom PDU-UK-6 Operation And User's Manual

The Manufacturer of the Products covered by this Declaration is
The Directives covered by this Declaration
89/336/EEC Electromagnetic Compatibility directive, as amended
73/23/EEC Low Voltage Equipment directive, amended by 93/68/EEC
The Products Covered by this Declaration
19 inch Rack Mount - BS 1363 (Type G) Plug - 6 Way Power Distribution Unit
220V-250VAC 50-60Hz - Max Output Power: 3250W - Max Current: 13A
The Basis on which Conformity is being Declared
The manufacturer hereby declares under his sole responsibility that the products identified above comply
with the protection requirements of the EMC directive and with the principal elements of the safety
objectives of the Low Voltage Equipment directive, and that the following standards have been applied:
All components used in this conform to current RoHS, CE & UL certification
(EMI:EN55022 (CISPR22) Class B; EN61000-3-2,3 EMS:EN61000-4-2,3,4,5,6,8,11; Light industry level, criteria A)
The technical documentation required to demonstrate that the products meet the requirements of the Low Voltage
Equipment directive has been compiled and is available for inspection by the relevant enforcement authorities.
The CE mark was first applied in: 2016
Signed:
Authority:
Technical Director (M Inst SCE)
Date:
10/08/2016
The attention of the specifier, purchaser, installer, or user is drawn to special measures and limitations to use which
must be observed when these products are taken into service to maintain compliance with the above directives.
Details of these special measures and limitations to use are available on request and are also contained in the product manual.
Declaration of Conformity
Made in the UK by Penn Elcom
9-10 Parsons Road, Parsons Industrial Estate,
Washington Tyne & Wear, NE37 1HB, UK
PDU-UK-6
HIGH-LEAKAGE-CURRENT - POWER SURGE GUARD
3 WAY PROTECTION L ~ N
Attention!
N ~ E L ~ E
E&OE