Advertisement
Quick Links
P D U 1 6 - 1 0 D J
16A 10 WAY POWER DISTRIBUTION
These 10 switches will
light when the channel
is selected
C20 Inlet
20A 250V Rating
1.8m POWER CABLES SUPPLIED FOR INTERNATIONAL APPLICATIONS
TYPE G 13A
UK,Ireland, Malta,
Malaysia & Singapore
LIMITED TO 13A MAX LOAD
REPLACE TYPE G WITH
BLUE C FORM FOR 16A USE
9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1HB, UK
1st check the power is connected & none of
10 x C13 Outlet
Max Combined
Load 16A
TYPE E/ F 16A
Europe, France,
Belgium, Poland,
Russia, Slovakia
& Czechia
0191 416 1717 or www.penn-elcom.com
RED Neon Indicator
on this switch will show there is
AC power to the unit.
Should these Not Be Lit then
the outputs have an
overload or short circuit
ON/OFF 16A Trip Switch
In the event of overload these will
cut power to the 10 output sockets
see Appendix for reset time
TYPE B 15A
USA, Canada,
Mexico & Japan
E&OE
USER GUIDE
TYPE 1 10A
Australia, New Zealand,
China & Argentina
LIMITED TO 10A MAX LOAD
REPLACE TYPE 1 WITH
BLUE C FORM FOR 16A USE
Advertisement
Related Manuals for Penn Elcom PDU16-10DJ
Summary of Contents for Penn Elcom PDU16-10DJ
- Page 1 P D U 1 6 - 1 0 D J USER GUIDE 16A 10 WAY POWER DISTRIBUTION RED Neon Indicator on this switch will show there is AC power to the unit. Should these Not Be Lit then 1st check the power is connected & none of the outputs have an overload or short circuit These 10 switches will...
- Page 2 PDU, as the Inrush Current can trip the power fuse and activate the protection circuit. • All equipment plugged into this unit should have the correct fuses fitted for their current draw. • Penn Elcom Ltd excepts no responsibility or liability for any equipment connected to this unit GUARANTEE YOUR EQUIPMENT IS GUARANTEED FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE OF THE PRODUCT AGAINST ANY DEFECTS DUE TO FAULTY MATERIALS OR FAULTY MANUFACTURING.
- Page 3 Declaration of Conformity The Manufacturer of the Products covered by this Declaration is Made in the UK by Penn Elcom 9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1HB, UK The Directives covered by this Declaration 89/336/EEC Electromagnetic Compatibility directive, as amended...
- Page 4 Insulation Resistance: 100 megohmsDOD. Maximum Operating Voltage: 250VAC, 50/60 Hz. These switches have the following certification approvals: UL 1077 , VDE 0642/EN60934, CCC & CE compliant. Penn Elcom Ltd excepts no responsibility or liability for any equipment connected to this unit...