Connecting The Power Cords - HP Vectra XU5 Getting Started Manual

Connecting the Power Cords

1. If fitted, remove the label covering the PC's power connector.
2. Connect the display and PC power cords to a grounded power outlet. The connectors
are shaped to fit one way only.
3. Before you switch ON the PC for the first time, install any additional Main memory and
video memory inside the PC. (Refer to the Setting Up Your PC manual supplied with
your PC.)
NOTE This PC has been designed to operate on all power systems, including "IT" power
systems. It is disconnected from the power by removing the power cord from the
power outlet. This means that the PC must be located near to an easily accessible
power outlet.
In order to improve energy consumption, it is recommended that the power cord be
removed from the power outlet when the PC is not used for some time. If several
pieces of equipment are being used, it is recommended that a multiple-outlet strip is
used with a double-pole switch or circuit breaker.
HP Vectra XU – Getting Started Preparing Your PC for Use 12