Table of Contents
Advertisement
The connection used by the printer:
LPT1 is a "parallel printer" connected to the parallel port
COM1 is a "serial printer" connected to the serial port.
3. When the initialization routine finishes, a Windows screen appears. (For operating
systems other than Windows, refer to the manuals supplied with the operating system
and follow the instructions on the display screen.)
4. Click the mouse on the Master Diskette Creation Utility, in the Hputils group. Follow
the screen messages to create master diskettes of your preloaded software.
5. * Click the mouse on the HP PCID utility. Follow the screen messages to create a
personalized identification label. An identification label similar to the one shown below
will appear on the PC's Power-On Self-Test screen the next time you start the PC.
HP Vectra XU – Getting Started
Preparing Your PC for Use
14
Advertisement
Table of Contents
