Using Diskettes - HP Vectra XU5 Getting Started Manual

Hp vectra xu5: quick start
Hide thumbs Also See for Vectra XU5:
Table of Contents

Advertisement

Using Diskettes

Your PC has a 3.5-inch, high-density, 1.44 MB, flexible disk drive (A) for:
high-density (1.44 MB) diskettes have HD written in one corner
low-density (720 KB) diskettes.
If you installed a 5.25-inch, high-density, 1.2 MB flexible disk drive (B), it can use high-
density 5.25-inch diskettes. It is recommended that you do not use low-density diskettes in
the high-density drive.
To use diskettes:
1. Insert the diskette into the flexible disk drive—ensure it is the right way up (label side
up).
2. Use your application software to access the diskette. The flexible disk drive light flashes
when your PC is using the diskette.
3. When you have finished using the diskette, wait until the drive light stops flashing, then
use the button on the flexible disk drive (the lever on a 5.25-inch flexible disk drive) to
release your diskette.
Store your diskettes in a safe place. Never touch the exposed surface.
HP Vectra XU – Getting Started
3.5-inch diskette used in drive A:
Direction
arrow
Write-
protect
720 KB
hole
A:
B:
Using Your PC
1.44 MB
diskette
identification
hole
1.44 MB
5.25-inch diskette
used in drive B
1.2 MB
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra xuVectra xu 5/xx

Table of Contents