Processors - HP Vectra VL600 Technical Reference Manual

Processors

All models come with a single Pentium III processor and level 2 cache
memory packaged in a self-contained, pre-sealed SECC2 module, installed on
the system board. The latest Pentium III processors have either 256KB level 2
cache on die or 512KB of out-of-chip level 2 cache.
The position of system board switches is shown below:
Switch
1 BIOS Crisis Recovery
2 CMOS
3 Password
Processor speed is recognized automatically.
For more information on processor technology, refer to the Technical
Reference Manual - Vectra Technology.
SWITCH BLOCK (SW 1)
Switch function:
Should normally be kept in the OFF position. Used in case of power loss during BIOS
update. Refer to flash.txt in the BIOS package downloadable from the HP Web site.
OFF = normal (default)
ON = clear CMOS and reload default values in Setup
OFF = enabled (default)
ON = disabled / clear User and Administrator passwords
2 System Features
Processors
21