MacDon Swath Compressor Operation And Parts Manual
  1. Manuals
  2. Brands
  3. MacDon Manuals
  4. Farm Equipment
  5. Swath Compressor
  6. Operation and parts manual
MacDon Swath Compressor Operation And Parts Manual

MacDon Swath Compressor Operation And Parts Manual

For m1 windrower
Hide thumbs Also See for Swath Compressor:
Table of Contents

Advertisement

Quick Links

Download this manual
Swath Compressor
for M1 Series Windrowers
Setup, Operation, and Parts Manual
215953 Revision A
Original Instruction
The Harvesting Specialists.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Swath Compressor and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MacDon Swath Compressor

Summary of Contents for MacDon Swath Compressor

  • Page 1 Swath Compressor for M1 Series Windrowers Setup, Operation, and Parts Manual 215953 Revision A Original Instruction The Harvesting Specialists.
  • Page 2 © 2022 MacDon Industries, Ltd. The information in this publication is based on the information available and in effect at the time of printing. MacDon Industries, Ltd. makes no representation or warranty of any kind, whether expressed or implied, with respect to the...
  • Page 3 IMPORTANT: M1170NT and M1170NT5 Windrowers are NOT compatible with model year 2022 and prior Swath Compressors. The model year 2023 Swath Compressor has changes to the dimensions to allow it to be used with a windrower in narrow transport mode.
  • Page 4 NOTE: Keep your MacDon publications up-to-date. The most current version can be downloaded from our website (www.macdon.com) or from our Dealer-only site (https://portal.macdon.com) (login required). Call your MacDon Dealer if you need assistance, information, or additional copies of this manual.
  • Page 5 Summary of Changes At MacDon, we’re continuously making improvements; occasionally these improvements affect product documentation. The following list provides an account of major changes from the previous version of this document. Internal Use Summary of Change Section Only Added note that M1170NT and M1170NT5 windrowers...

  • Page 6: Serial Number

    Serial Number Record the swath compressor serial number in the space below. Serial Number: ________________________ The serial number plate (A) is located on the left side of the swath compressor frame. Serial Number Plate Location 215953 Revision A...

  • Page 7: Table Of Contents

    1.7.1 Installing Safety Decals........................12 1.8 Understanding Safety Signs ........................13 Chapter 2: Installation Instructions ......................17 2.1 Removing Swath Compressor from Shipping Crate ..................17 2.2 Installing Swath Compressor........................20 2.2.1 Installing Frame ........................... 20 2.2.2 Installing Electrical Harness......................25 2.2.3 Connecting Hydraulics ........................
  • Page 8 Chapter 5: Illustrated Parts Lists ......................55 5.1 Abbreviations ............................56 5.2 Serial Number Breaks..........................57 5.3 Swath Compressor Shield Assembly ......................58 5.4 Swath Compressor Hydraulics and Supports ....................60 5.5 Decals ..............................64 Chapter 6: Reference ..........................67 6.1 Torque Specifications ..........................67 6.1.1 Metric Bolt Specifications ......................

  • Page 9: Chapter 1: Safety

    Chapter 1: Safety Understanding and consistently following safety procedures helps to ensure the safety of machine operators and bystanders. 1.1 Safety Alert Symbols The safety alert symbol indicates important safety messages in this manual and on safety signs on the machine. This symbol means: •...

  • Page 10: Signal Words

    SAFETY 1.2 Signal Words Three signal words, DANGER, WARNING, and CAUTION, are used to alert you to hazardous situations. Two signal words, IMPORTANT and NOTE, identify non-safety related information. Signal words are selected using the following guidelines: DANGER Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.

  • Page 11: General Safety

    SAFETY 1.3 General Safety Protect yourself when assembling, operating, and servicing machinery. CAUTION The following general farm safety precautions should be part of your operating procedure for all types of machinery. Wear all protective clothing and personal safety devices that could be necessary for the job at hand.
  • Page 12 SAFETY • Wear close-fitting clothing and cover long hair. NEVER wear dangling items such as hoodies, scarves or bracelets. • Keep all shields in place. NEVER alter or remove safety equipment. Ensure that the driveline guards can rotate independently of their shaft, and that they can telescope freely.

  • Page 13: Maintenance Safety

    SAFETY 1.4 Maintenance Safety Protect yourself when maintaining machinery. To ensure your safety while maintaining the machine: • Review the operator’s manual and all safety items before operating or performing maintenance on the machine. • Place all controls in Neutral, stop the engine, set the parking brake, remove the ignition key, and wait for all moving parts to stop before servicing, adjusting, or repairing the machine.

  • Page 14: Hydraulic Safety

    SAFETY 1.5 Hydraulic Safety Protect yourself when assembling, operating, and servicing hydraulic components. • Always place all hydraulic controls in Neutral before leaving the operator’s seat. • Ensure that all the components in the hydraulic system are kept clean and in good condition. •...

  • Page 15: Welding Precaution

    SAFETY 1.6 Welding Precaution Welding should never be attempted on the attachment while it is connected to a windrower. WARNING Severe damage to sensitive, expensive electronics can result from welding on the attachment while it is connected to the windrower. It is impossible to know what effect high current could have with regard to future malfunctions or shorter lifespan.
  • Page 16 SAFETY • Firewall extension module (A) Two connectors: P235 and P236 Location: Behind the cab, near the header lift/fan manifold To disconnect the connectors, insert the end of a a small 3–6 mm (1/8–1/4 in.) blade screwdriver into the connector’s locking tab.
  • Page 17 SAFETY NOTE: To disconnect the remaining circular Deutsch connectors, rotate the outer collar counterclockwise. • Cab connectors (A) Two round connectors: C1 and C2 Location: Under the cab Figure 1.19: Cab Connectors • Roof connectors (A) Four connectors: C10, C12, C13, and C14 Location: Under the cab at the base of the left cab post Figure 1.20: Roof Connectors •...
  • Page 18 SAFETY • Engine harness (A) Two round connectors: C30 and C31 Location: Inside the left frame rail, at the rear of the windrower Figure 1.22: Engine Harness • Air conditioning (A/C) box connectors (A) Two connectors: C15 and C16 Location: Rear of the A/C box Figure 1.23: A/C Box Connectors •...
  • Page 19 SAFETY To align the connectors: 1. Observe the channel cuts and mating channel protrusions on the inner part of the circular walls of the connectors. 2. Face the mating connectors towards each other, and rotate the connectors so that the channels are aligned. 3.

  • Page 20: Safety Signs

    • If the original part on which a safety sign was installed is replaced, ensure that the repair part displays the current safety sign. • Replacement safety signs are available from your MacDon Dealer. Figure 1.25: Operator’s Manual Decal 1.7.1 Installing Safety Decals Replace any safety decals that are worn or damaged.

  • Page 21: Understanding Safety Signs

    SAFETY 1.8 Understanding Safety Signs Refer to this section to learn the hazards that each type of safety decal denotes. MD #184372 General hazard pertaining to machine operation and servicing DANGER To prevent injury or death from the improper or unsafe operation of the machine: •...
  • Page 22 SAFETY MD #166466 High-pressure oil hazard WARNING High-pressure hydraulic fluid can penetrate human skin, which can cause serious injury such as gangrene, which can be fatal. To prevent this: • Do NOT go near hydraulic fluid leaks. • Do NOT use a finger or skin to check for hydraulic fluid leaks.
  • Page 23 MD #291638 Lock – swath compressor deck DANGER To prevent injury: • Engage lock when swath compressor is not in use. • Lock compressor shield before servicing or working under the windrower. • Lock compressor shield before operating in engine- forward mode.

  • Page 25: Chapter 2: Installation Instructions

    To unpack and install the swath compressor, follow these procedures in order. 2.1 Removing Swath Compressor from Shipping Crate Follow these steps to unpack the swath compressor from the shipping crate. Retain all parts for installation unless instructed to discard.
  • Page 26 INSTALLATION INSTRUCTIONS 3. Remove four bolts and nuts (A) and remove two bar clamps (B) from front pivot support (C). Figure 2.3: Front Pivot Support 4. Remove bolts and nuts (B) securing front support (A) to the left and right supports. 5.
  • Page 27 10. Remove right support (D). Figure 2.7: Right Support 11. Remove rock shaft (A). 12. Remove four lag screws (B) securing the swath compressor to its shipping crate. Discard the lag screws and washers. 13. Leave the swath compressor on the shipping pallet.

  • Page 28: Installing Swath Compressor

    INSTALLATION INSTRUCTIONS 2.2 Installing Swath Compressor Follow these steps to install the swath compressor onto an M1 Series Windrower. The swath compressor weighs approximately 180 kg (400 lb.). 2.2.1 Installing Frame The swatch compressor frame consists of the front, left, and right supports, and the rock shaft. These parts were unpacked from the shipping crate in the previous procedure.
  • Page 29 INSTALLATION INSTRUCTIONS 3. Loosen clamps (A) at the rear of the left and right supports. Figure 2.11: Left and Right Supports 4. Position left support (A) onto the left side of the windrower frame as shown, and temporarily clamp in position with bar clamp (B) and M10 x 35 bolt (C) and nut.
  • Page 30 INSTALLATION INSTRUCTIONS 7. Secure the rear of left support (A) with M10 x 35 mm bolts (B) and (C), and nuts through the windrower frame. Do NOT fully tighten. Figure 2.14: Left Support 8. Remove bolt and nut (A) securing air cleaner support (B) to windrower frame (C).
  • Page 31 INSTALLATION INSTRUCTIONS 11. Position air cleaner support (A) between the windrower frame and right rear support (B) and secure with M10 x 35 bolt and nut (C). The bolt head faces aft. 12. Secure right support (B) to the inside of the windrower frame with the bar clamp and M10 x 35 bolt (D) and nut.
  • Page 32 INSTALLATION INSTRUCTIONS 16. Ensure sensor arm (A) engages bolt (B) on the left rock shaft lift support, and ensure it is not bent or damaged. Figure 2.20: Sensor on Left Support 17. Tighten six bolts (A) attaching the supports directly to the frame and torque to 39 Nm (29 lbf·ft).

  • Page 33: Installing Electrical Harness

    Figure 2.22: Fuel Filter Sensor Wire 2.2.2 Installing Electrical Harness The electrical harness included with the swath compressor needs to be connected to connector P729 on the windrower chassis harness. 1. Locate three-pin electrical connector P729 (A) above the front cross member of the windrower frame.

  • Page 34: Connecting Hydraulics

    Figure 2.24: Windrower Electrical Harness 2.2.3 Connecting Hydraulics The hydraulic hoses included with the swath compressor need to be connected to the windrower to allow the Operator to raise and lower the swath compressor from the windrower cab. M1170 (2017 and earlier) hose routing 1.
  • Page 35 INSTALLATION INSTRUCTIONS CAUTION Ensure that all bystanders have cleared the area. 3. Start the engine and press SWATH COMPRESSOR LOWER switch (A) for five seconds to relieve pressure behind the couplers. 4. Shut down the engine, and remove the key from the ignition.

  • Page 36: Installing Shield Assembly

    INSTALLATION INSTRUCTIONS 2.2.4 Installing Shield Assembly The shield assembly attaches to the swath compressor frame. 1. Start the engine and raise the header legs. 2. Press SWATH COMPRESSOR LOWER button (A) to fully retract the swath compressor cylinder. 3. Shut down the engine, and remove the key from the ignition.
  • Page 37 7. Ensure bushings (A) are installed onto pins (B) on both sides of the rock shaft. 8. Position a floor jack or equivalent under swath compressor shield cross member (C). 9. Raise the shield with the jack sufficiently to connect lowering arm (D) to pin (B) on rock shaft (G).
  • Page 38 INSTALLATION INSTRUCTIONS 12. Loosen handle (A) and remove three bolts and nuts (B) from side deflector (C). Retain the bolts and nuts. Figure 2.35: Side Deflector Shipping Position 13. Rotate side deflector (A) to working position, and secure it to the compressor shield with three bolts and nuts (B) from the previous step.
  • Page 39 INSTALLATION INSTRUCTIONS 18. Install hairpin (A) to secure pivot pin (B). Repeat on the opposite side of the shield. Figure 2.38: Front Pivot Pins 19. Align the rod end of hydraulic cylinder (A) with the holes in the rock shaft and secure with pin (B). Ensure the plate on the pin engages slot (E) in the rock shaft support.

  • Page 41: Chapter 3: Operation

    Safely operating your machine requires familiarizing yourself with its capabilities. 3.1 Activating the Swath Compressor The swath compressor must be activated in the windrower’s control system the first time it is attached to a windrower. NOTE: If necessary, refer to the windrower operator’s manual to review navigating the Harvest Performance Tracker (HPT) display.
  • Page 42 Figure 3.3: Header Setup Menu 7. Select ATTACHMENTS (A) from the HEADER SETUP menu. Figure 3.4: Header Setup Menu 8. Select SWATH COMPRESSOR (A) from the menu. The sensor is now active, and the HPT will control the swath compressor.
  • Page 43 Figure 3.6: Setup Menu 10. Select SENSORS menu (A). Figure 3.7: Windrower Settings 11. Scroll to SWATH COMPRESSOR (A) and confirm the swath compressor sensor is enabled. 12. Calibrate the sensor. For instructions, refer to Calibrating Position Sensor, page 36.

  • Page 44: Calibrating Position Sensor

    The swath compressor position sensor must be calibrated when the system is first installed. NOTE: To calibrate the position sensor, the swath compressor must be attached to the windrower, but it can be calibrated with or without a header attached. This procedure shows the calibration process with both the swath compressor and header attached to the windrower.
  • Page 45 OPERATION 5. Scroll to WINDROWER SETTINGS icon (A) and press SELECT. 6. Scroll to CALIBRATION icon (B), and press SELECT to open the Calibration Selection menu. Figure 3.10: Windrower Settings Icon and Calibration Submenu Icon 7. In the Calibration Selection menu, scroll to Position Sensors (A) and press SELECT.
  • Page 46 OPERATION NOTE: Pressing X icon (A) (or pressing the HOME, BACK or any GSL button [buttons not shown]) at any time during the calibration process will EXIT calibration without saving. The engine speed will also return to the original rpm. NOTE: If a sensor goes out of its normal operating range during the calibration process, calibration will stop and a message...
  • Page 47 OPERATION NOTE: If the voltage of any sensor sweeps below what is acceptable during calibration, a message will be displayed after completing the calibration with a list of sensors with voltage range that is not acceptable. The Operator must then adjust the sensor(s) and repeat the calibration process from the beginning.

  • Page 48: Using Swath Compressor

    The swath compressor height can be adjusted and monitored with the Harvest Performance Tracker (HPT) display. Height can be adjusted for crop ripeness, yield, and the amount of compression required. The swath compressor will automatically lift up if the Operator stops or reverses the windrower.

  • Page 49: Setting Up Swath Compressor

    • The swath compressor fully rises as the ground speed transitions through 1.6 km/h (1 mph) during deceleration. • The swath compressor fully rises when the header is disengaged at a ground speed higher than 1.6 km/h (1 mph). • An IMPORTANT message to raise the swath compressor appears on the HPT accompanied by a tone when the GSL is moved out of PARK in engine-forward mode if the swath compressor is not fully raised.
  • Page 50 For instructions, refer to 3.3.5 Adjusting Side Deflectors, page Figure 3.22: Display • If the swath compressor shield raises too easily in dense windrows, adjust the compression. For instructions, refer to 3.3.4 Adjusting Compression, page 215953...

  • Page 51: Programming One-Touch-Return

    OPERATION 3.3.3 Programming One-Touch-Return The One-Touch-Return switches A, B, and C always save header height settings, but swath compressor settings can also be saved depending on the header type. To program the One-Touch-Return switches, follow these steps: 1. Adjust the header and swath compressor to desired position.

  • Page 52: Adjusting Side Deflectors

    Figure 3.25: Swath Compressor Side Deflectors 3.3.6 Locking and Unlocking Swath Compressor The swath compressor lock is located on the left cab-forward side of the swath compressor frame. When engaged, the lock prevents the compressor shield from lowering. 1. Turn lock handle (A) clockwise to engage the swath compressor lock under the following conditions: •...

  • Page 53: Chapter 4: Maintenance

    Chapter 4: Maintenance The swath compressor does not require any scheduled maintenance or servicing. If it’s necessary to replace components, refer to 5 Illustrated Parts Lists, page 55 in this manual. 4.1 Removing Swath Compressor Shield Windrower service or maintenance procedures may require access under the machine. Do NOT sit on the swath compressor shield to service the windrower.
  • Page 54 11. Lower the back end of the shield to the ground and move the jack away from the work area. 12. Start the windrower and fully raise the swath compressor lift mechanism. Slowly drive the windrower away from the shield.

  • Page 55: Electrical System

    The electrical system for the swath compressor is powered by the windrower. 4.2.1 Rotary Sensor (MD #128994) The rotary position sensor is located on the inboard side of the swath compressor’s left support assembly. Range: 0.5–4.5 volts (-45° – +45°) Table 4.1 Rotary Sensor Pinout (MD #128994)

  • Page 56: Swath Compressor Harness (Md #209256)

    MAINTENANCE 4.2.2 Swath Compressor Harness (MD #209256) The swath compressor harness connects to the position sensor and P729 on the windrower’s chassis harness. Figure 4.7: Harness (MD #209256) A - MD #134091 (Tyco, AMP SS 1.5 3P) – to Rotary Sensor B - MD #134018 (Deutsch, DTM04-3P) –...

  • Page 57: Harness Connections

    MAINTENANCE Harness Connections The swath compressor harness connects to the position sensor and P729 on the windrower’s chassis harness. P560A P560 HSG: DTM04-3P HSG: 282087-1 LOCK: WM-3P SF2201 SF2201 SF2301 SF2501 SF2501 SF2301 P729 HSG: DTM06-3S LOCK: WM-3S CH2201G CH2325 CH0552P Figure 4.8: Swath Compressor Harness Connections...

  • Page 58: Electrical Schematic

    MAINTENANCE 4.2.3 Electrical Schematic This electrical schematic shows the electrical circuit on the chassis harness that provides power to the swath compressor. P247 P729 CH2201A Y18 CH2201F Y18 CH2201G Y18 CH2325 W18 CH0552D B18 CH0552F B18 CH0552P B18 CH2325 W18...

  • Page 59: Hydraulic Schematic

    MAINTENANCE 4.3 Hydraulic Schematic This hydraulic schematic shows an M1 Series Windrower with a Swath Compressor attached. 215953 Revision A...
  • Page 61 MAINTENANCE Hydraulic Schematic – M1 Series with Swath Compressor 215953 Revision A...
  • Page 62 MAINTENANCE A - Lift Manifold B - Swath Compressor Lift Cylinder C - Hydraulic Tank D - Hydraulic Filter Element E - Inlet Manifold F - Junction Manifold G - Reducing Valve H - Gear Pump 215953 Revision A...

  • Page 63: Chapter 5: Illustrated Parts Lists

    Chapter 5: Illustrated Parts Lists This section lists the replacement parts for the M1 Series Windrower and Swath Compressor. 215953 Revision A...

  • Page 64: Abbreviations

    KR – knife return LG – long LH – left hand (determined from LK – lock Operator's position, facing forward) MD – MacDon MACH – machine MFA – manual fore-aft MY – model year NC – national coarse thread NF – national fine thread NSS –...

  • Page 65: Serial Number Breaks

    ILLUSTRATED PARTS LISTS 5.2 Serial Number Breaks The side of the serial number on which the dash (–) appears determines whether the part is used "up to" or "after" the serial number given. Example: • –162249 Used on machines up to and including serial number 166249 •...

  • Page 66: Swath Compressor Shield Assembly

    5.3 Swath Compressor Shield Assembly 215953 Revision A...
  • Page 67 Description Number Serial Number SUPPORT – DEFLECTORS, WELDMENT 306660 DEFLECTOR – LH WELDMENT 306661 DEFLECTOR – RH WELDMENT 306662 SHEET – SWATH COMPRESSOR 277323 DISC – RETAINER 128697 BUSHING – FLANGE 128737 ARM – LOWER 128729 BUMPER – RUBBER 203350 ANGLE –...

  • Page 68: Swath Compressor Hydraulics And Supports

    5.4 Swath Compressor Hydraulics and Supports 215953 Revision A...
  • Page 69 135474 FITTING – ELBOW 90° HYD CW O-RING 136149 FITTING – ADAPTER 136194 FASTENER – FIR TREE MT W/ TIE 136655 HARNESS – SWATH COMPRESSOR 209256 DECAL – DOWN FORCE 128973 DECAL – UP LOCK 128974 SUPPORT – RH WELDMENT 128781 SUPPORT –...
  • Page 70 ILLUSTRATED PARTS LISTS 215953 Revision A...
  • Page 71 ILLUSTRATED PARTS LISTS Part Description Number Serial Number WASHER – CONICAL SPRING 1/2 IN. 184595 WASHER – FLAT REG M12-300HV-A3L 184714 NUT – HEX M12 X 1.75-8-A3L 184694 BOLT – RHSN TFL M5 X 0.8 X 40-8.8-AA1J 136604 WASHER – FLAT LARGE M5-200HV 184701 NUT –...

  • Page 72: Decals

    5.5 Decals 215953 Revision A...
  • Page 73 ILLUSTRATED PARTS LISTS Part Description Number Serial Number DECAL – HIGH PRESSURE FLUID 166466 DECAL – DOWN FORCE 128973 DECAL – DECK LOWER LOCK 291638 DECAL – PINCH POINT 174683 DECAL – READ MANUAL 184372 DECAL – CA PROPOSITION 65 302204 May not be exactly as shown.

  • Page 75: Chapter 6: Reference

    Chapter 6: Reference The topics provided in this chapter can be consulted as needed. 6.1 Torque Specifications The following tables provide torque values for various bolts, cap screws, and hydraulic fittings. Refer to these values only when no other torque value has been specified in a given procedure. •...
  • Page 76 REFERENCE Table 6.2 Metric Class 8.8 Bolts and Class 9 Distorted Thread Nut Torque (Nm) Torque (lbf·ft) (*lbf·in) Nominal Size (A) Max. Max. Min. Min. 3-0.5 3.5-0.6 4-0.7 5-0.8 6-1.0 8-1.25 18.8 20.8 *167 *185 10-1.5 12-1.75 Figure 6.2: Bolt Grades 14-2.0 16-2.0 20-2.5...

  • Page 77: Metric Bolt Specifications - Cast Aluminum

    REFERENCE Table 6.4 Metric Class 10.9 Bolts and Class 10 Distorted Thread Nut Torque (Nm) Torque (lbf·ft) (*lbf·in) Nominal Size (A) Max. Max. Min. Min. 3-0.5 3.5-0.6 4-0.7 5-0.8 6-1.0 10.7 11.8 *105 8-1.25 10-1.5 12-1.75 14-2.0 Figure 6.4: Bolt Grades 16-2.0 20-2.5 24-3.0...

  • Page 78: O-Ring Boss Hydraulic Fittings - Adjustable

    REFERENCE 6.1.3 O-Ring Boss Hydraulic Fittings – Adjustable The standard torque values are provided for adjustable hydraulic fittings. If a procedure specifies a different torque value for the same type and size of fitting found in this topic, refer to the value specified in the procedure instead. 1.

  • Page 79: O-Ring Boss Hydraulic Fittings - Non-Adjustable

    REFERENCE Table 6.6 O-Ring Boss (ORB) Hydraulic Fittings – Adjustable (continued) Torque Value Thread Size (in.) SAE Dash Size lbf·ft (*lbf·in) 7/16–20 19–21 14–15 1/2–20 21–33 15–24 9/16–18 26–29 19–21 3/4–16 46–50 34–37 7/8–14 75–82 55–60 1 1/16–12 120–132 88–97 1 3/8–12 153–168 113–124...

  • Page 80: O-Ring Face Seal Hydraulic Fittings

    REFERENCE Table 6.7 O-Ring Boss (ORB) Hydraulic Fittings – Non-Adjustable (continued) Torque Value Thread Size (in.) SAE Dash Size lbf·ft (*lbf·in) 3/4–16 46–50 34–37 7/8–14 75–82 55–60 1 1/16–12 120–132 88–97 1 3/8–12 153–168 113–124 1 5/16–12 176–193 130–142 1 5/8–12 221–243 163–179 1 7/8–12...

  • Page 81: Tapered Pipe Thread Fittings

    REFERENCE 6. Use three wrenches when assembling unions or joining two hoses together. 7. Verify the final condition of the fitting. Table 6.8 O-Ring Face Seal (ORFS) Hydraulic Fittings Torque Value Thread Size (in.) Tube O.D. (in.) SAE Dash Size lbf·ft –...
  • Page 82 REFERENCE Table 6.9 Hydraulic Fitting Pipe Thread Tapered Pipe Thread Size Recommended TFFT Recommended FFFT 2–3 12–18 1/8–27 2–3 12–18 1/4–18 2–3 12–18 3/8–18 2–3 12–18 1/2–14 1.5–2.5 12–18 3/4–14 1.5–2.5 9–15 1–11 1/2 1.5–2.5 9–15 1 1/4–11 1/2 1.5–2.5 9–15 1 1/2–11 1/2 1.5–2.5...

  • Page 83: Conversion Chart

    REFERENCE 6.2 Conversion Chart Both SI units (including metric) and US customary units (sometimes referred to as standard units) of measurement are used in this manual. A list of those units along with their abbreviations and conversion factors is provided here for your reference.

  • Page 85: Index

    Index 13125..............61 184595 ..............63 16652..............59 184692 ..............59 18601..............63 184694 ..............63 18648..............61 184701 ..............63 184711 ..............59 21763..............61 30505..............61 184714 ..............63 30628..............61 191393 ..............59 30753..............61 197230 ..............63 32247..............
  • Page 86 17 shields installing shield assembly ........28 removing shield assembly........45 side deflectors ............44 lock and unlock swath compressor ......44 spare parts decals ............... 64 hydraulics and supports ........60 swath compressor shield assembly......58 specifications maintenance and servicing........

  • Page 87: Predelivery Checklist

    Check for loose hardware. Tighten to required torque. 6.1 Torque Specifications, page 67 Raise and lower the swath compressor to check for linkage binding. Rubber bumpers at the rear should contact the windrower frame when fully raised. If 2.2.1 Installing Frame, page 20...
  • Page 90 CUSTOMERS M M a a c c D D o o n n . . c c o o m m DEALERS P P o o r r t t a a l l . . M M a a c c D D o o n n . . c c o o m m Trademarks of products are the marks of their respective manufacturers and/or distributors.

Table of Contents