HP Vectra VL5 5 User Manual page 23

2 The software initialization routine starts. It displays the software
license agreement, gives you an opportunity to read Working in
Comfort (ergonomic advice for computer users), and then asks
questions about the PC. For example:
The name of the person who will use the PC and your company
•
name. (If necessary, the name of the user can be modified later.)
The current date and time.
•
The type of printer (for example, HP LaserJet 4M). This is shown
•
on the front of the printer. You also need to enter the connection
used by the printer.
The model number of your display. The display's model number
•
is shown on the cover of the manual supplied with the display and
on a label on the rear of the display.
Depending on which model PC you have, you may also be asked
•
to select which operating system you want to use, Windows 3.11
or Windows 95. Once you have confirmed your selection of the
operating system, you cannot change that selection. The
operating system that you have NOT chosen will be deleted from
the computer's hard disk
3 While the initialization program is running, you can complete the
Warranty Registration card that you will find inside the back of this
manual. When the initialization routine has finished, click on OK and
the PC will restart.
After Your PC Has Restarted
Set the keyboard to a comfortable position.
Adjust the display screen's brightness and contrast to suit your
needs. If the picture does not fill the screen or is not centered, adjust
it using the controls on the display. Refer to the display's manual for
details.
1 Setting Up and Using Your PC
Starting and Stopping Your PC
English 11