Cleaning The Hp Touchsmart Pc Screen; Using The Computer With Safety And Comfort - HP TouchSmart IQ804 User Manual

Cleaning the HP TouchSmart PC Screen

To achieve the best touch sensitivity, keep the screen clean from foreign objects. Avoid excessive dust
accumulation on all sides and edges of the screen.
Before cleaning the touch screen, you must disable it by turning off the computer. If the computer is not
turned off, the touch screen is enabled, and you could lose data while cleaning it.
1 Turn off the computer. Tap the Windows Vista start button, tap the Arrow button
next to the Lock icon, and then tap Shut Down.
2 Disconnect the power cord from the wall.
3 Spray a small amount of a mild glass cleaner onto the cleaning cloth that came with your
HP TouchSmart PC. You can also use a soft cloth or paper towel dampened with a typical household
glass cleaner to clean the touch screen.
4 Wipe the surface and each side of the touch screen to remove dirt, fingerprints, or other debris.
CAUTION: Do not spray or place the cleaner directly on the screen; spray the cleaner into the
cloth, and then wipe the sides and surface of the touch screen.
Do not use an abrasive cleaner or cloth when cleaning the sides or the surface of the screen,
because this could cause damage to the touch screen.
.

Using the Computer with Safety and Comfort

WARNING: To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes
proper workstation setup, posture, and health and work habits for computer users. It also
provides important electrical and mechanical safety information.
Before you begin using the computer, arrange the computer and your work area to maintain your comfort
and productivity. Refer to the Safety & Comfort Guide for important ergonomic information:
Tap the Windows Vista start button, tap Help and Support, User Guides, and then tap
Safety & Comfort Guide.
Or
Type www.hp.com/ergo into the Web browser address box, and then press the Enter key on the
keyboard.
Getting to Know the HP TouchSmart PC
29