Adjusting The Ambient Light; Adding Hardware And Software; Upgrading Your Hp Touchsmart Pc Hardware; Updating Your Hp Touchsmart Software - HP TouchSmart IQ804 User Manual

Adjusting the Ambient Light

The HP TouchSmart Ambient Light casts a glow from the base of the computer. By default, Ambient Light is
turned off. Once you turn it on, it will remain on until you manually turn it off.
You can change the ambient light color through the HP Light program.
To control ambient light intensity when the computer is off or in Sleep mode:
1 Press the Ambient Light button on the left side of the computer to turn the Ambient Light on.
2 Continue pressing the button to cycle through low intensity, medium intensity, high intensity, off,
and on.
NOTE: The Ambient Light dims when the computer goes into sleep mode.
To change the color or intensity of ambient light when the computer is on:
1 Tap the Windows Vista start button, All Programs, HP, and then tap HP Light.
2 Tap the color you want.
3 Change the intensity of light either by tapping toward the top or toward the bottom of the color
spectrum, or by pressing the ambient light button on the computer.

Adding Hardware and Software

Some HP TouchSmart PCs feature a 64-bit Windows Vista operating system, and may not be compatible
with all software you install or all hardware you add. Check with your hardware and software
manufacturer to ensure compatibility with the operating system.

Upgrading your HP TouchSmart PC hardware

To find detailed instructions on removing and replacing the memory and the hard disk drive for your
HP TouchSmart PC, refer to the Upgrading and Servicing Guide that came with your computer.

Updating your HP TouchSmart software

Check www.hp.com/go/touchsmart for updated software and new software features.
*Certain Windows Vista product features require advanced or additional hardware.
See www.microsoft.com/windowsvista/getready/hardwarereqs.mspx and
www.microsoft.com/windowsvista/getready/capable.mspx for details. Windows Vista Upgrade Advisor
can help you determine which features of Windows Vista will run on your computer. To download the tool, visit
www.windowsvista.com/upgradeadvisor
18
Getting Started
*