Download  Print this page

Speakers And Sound; Internet Access - HP TouchSmart 320-1030 Getting Started Manual

Hp touchsmart 320-1030: user guide
Hide thumbs


Table of Contents

Speakers and sound

Possible solution
Volume is very
Ensure that you connected the speakers to the Audio Out connector on the back of the
low or
computer. (Additional audio connectors are used for multiple-channel speakers.) Detached
non-powered speakers (speakers without a separate power source, such as batteries or a
power cord) do not produce satisfactory sound. Replace the non-powered speakers with
powered speakers.
No sound is
For Windows 7:
If you are using built-in computer speakers, use the Volume button to adjust volume. You
can also use My Display TouchSmart Edition to ensure that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the
speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
When external
When an Audio Line Out connector (such as headphones or external speakers) is
speakers are
connected, the internal speakers are muted.
connected, the
audio is muted.

Internet access

Possible solution
Internet programs
Log in to your Internet Service Provider (ISP), and start the desired program.
do not start
Tap the Start button, tap Control Panel, tap Action Center, and then tap
Under Hardware and Sound, tap Troubleshoot and audio playback.
Speakers and sound

Hide quick links:


Table of Contents

  Also See for HP TouchSmart 320-1030

  Related Manuals for HP TouchSmart 320-1030