Powering Up The Server Blade - HP ProLiant xw25p User Manual

Figure 17 shows a completed network cabling method with the DHCP server (1) and
the hub (2).
IMPORTANT: For operating system deployment or file management, an optional server can
be connected to the hub.
NOTE: Connecting the diagnostic cable to the diagnostic port or connecting the local I/O
cable to the I/O port automatically disables the iLO connection on the rear of the diagnostic
station.
Figure 17: Completed network cabling method
NOTE: Your completed configuration may look different, depending on which server blade
you are using.
After the network cabling method is complete, the server blade and diagnostic station
are ready for use. See the "Powering Up the Server Blade" section.

Powering Up the Server Blade

To power up the server blade:
1. Power up the diagnostic station by pressing the Power On/Off button.
2. Power up the server blade.
HP ProLiant BL p-Class System Diagnostic Station User Guide 29