Table of Contents
Advertisement
OPERATION
Placement
Ensuring there are no obstructions around, place the appliance on a flat surface.
Powering on/off
Tap the power button to turn on the dehumidifier. The power indicator light will then turn
on. If used before, the dehumidifier will operate in the mode before it was last turned off.
To turn it off, tap the power button again.
Note:
If you are restarting the dehumidifier after it was turned off, wait for 3 minutes before
restarting.
Display
When the appliance is operating, the display will show the current level of relative ambient
humidity.
The display will show numbers between 40–80 when the humidity level is between
40–80%. If the humidity level is lower than 40%, the display will show 'LO'. If the humidity
level is above 80%, the display will show 'HI'.
Adjusting the fan speed
This dehumidifier has three fan speeds (High, Medium, and Low). Press this button to adjust
the speed.
• Three indicator lights will illuminate when the fan speed is High.
• Two indicator lights will illuminate when the fan speed is Medium.
• One indicator light will illuminate when the fan speed is Low.
Child lock
The child lock prevents buttons from being functional and prevents the appliance from
being turned off.
• Press and hold the fan speed button for three seconds to activate the child lock. The
child lock indicator light will then illuminate.
• Press and hold the fan speed button for three seconds again to deactivate the child
lock. The child lock indicator light will disappear.
9
Advertisement
Table of Contents
