Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator
light is flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by holding down the timer button for five seconds until the Wi-Fi indicator light
is flashing rapidly.
Add device through network
5. Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Air Treatment >
Dehumidifiers).
7. Ensure that the device is in pairing mode, with the Wi-Fi indicator light flashing, and
tap "Confirm light is rapidly flashing".
14
Advertisement
Table of Contents
