Kenwood BLP31 Instructions Manual page 7

Leaking will occur if the seal
l
is damaged or incorrectly
fitted.
3 Hold the underside of the
blade unit and lower it onto
the bottle, blades down.
4 Screw the blade assembly
onto the bottle. Refer to the
graphics on the underside of
the blade unit as follows:
- open
- close
Shake to disperse the
l
ingredients.
Place the blender onto the
l
power unit and turn clockwise
to lock .
Hints and Tips
Note that when the bottle is filled to max capacity (400ml),
l
this is approximately two servings.
Ensure your drink is thin enough to be able to drink from the
l
dispensing lid. To make a thinner drink add more liquid.
After blending, some drinks may not be completely smooth
l
due to seeds or the fibrous nature of ingredients.
When drinking through the lid, take care that the drink is
l
smooth and fully processed. Some experimentation may be
necessary when processing firm or unripe ingredient to achieve
the desired result.
Some drinks may separate on standing, therefore it is best to
l
drink them straight away or stir before drinking.
When the dispensing lid is fitted always keep the bottle upright.
l
5 Select maximum speed. Allow
the ingredients to blend until
smooth.
Once your drink has reached
l
the desired consistency, you
can use the pulse 'P' to ensure
all ingredients are thoroughly
blended.
Using the drinking lid
1 Fit and lock the lid by turning
clockwise.
2 When you want to drink,
simply flip open the lid cover.
The drink can be consumed
straight from the bottle.
7