Replacing The Front Bezel - HP Pro 3000 SFF Hardware Reference Manual

2. While facing the inside of the front bezel, press the two retaining tabs on the right towards the outer
edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 4

Replacing the Front Bezel

To replace the front bezel, insert the three hooks on the bottom of the bezel into the rectangular holes
on the chassis (1) then rotate the bezel into place so that the catches on the three tabs on the top of
the bezel snap into place on the chassis (2).
Figure 5 Replacing the Front Bezel
Removing a Bezel Blank
Replacing the Front Bezel 5