Drive Positions - HP Pro 3000 SFF Hardware Reference Manual

Small form factor business pcs
Table of Contents

Advertisement

15.
Reconnect the power cord and any external devices, then turn on the computer.
16.
Lock any security devices that were disengaged when the access panel was removed.
17.
Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for
instructions on using Computer Setup.

Drive Positions

NOTE:
Your computer model may look different than the model shown below. Diskette drives are only
available on some models.
Figure 15
1
3.5-inch external drive bay for optional drive (diskette drive shown)
2
3.5-inch internal hard drive bay
3
5.25-inch external drive bay for optional drive (optical drive shown)
To verify the type, size, and capacity of the storage devices installed in the computer, run Computer
Setup. Refer to the Computer Setup (F10) Utility Guide for more information.
14
Hardware Upgrades
Drive Positions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro 3000 series

Table of Contents