Installation - AEG SWD81800L1 User Manual

12 www.aeg.com
6.2 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective
door gaskets. Contact the After Sales
Service.
6.3 Replacing the lamp Wine
Cellar
1. Disconnect the mains plug from the
mains socket.
2. Remove the lamp cover by pressing
it inwards with a tool (e.g.
screwdriver) to free the rear side
hookings.
3. At the same time, free the middle
hook and slide off the cover in the
direction of the arrows.
7. INSTALLATION
7.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
WARNING!
Refer to Safety chapters.
4. Replace the used lamp with a new
lamp of the same type and
specifically designed for household
appliances and having the same
characteristics.
5. Connect the mains plug to the mains
socket.
6. Open the door. Make sure that the
lamp comes on.
class indicated on the rating plate of the
appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C