Download Print this page

Additional Safety Hints; Technical Data; Maintenance And Care - BorMann Elite BVC1010 Manual

Advertisement

Available languages

Available languages

EN

Additional safety hints

• Do not vacuum any sharp-edged, hot or incandescent materials.
• The appliance should not be exposed to heat. For use with cold ashes only! (≤50 ° C)
• Do not vacuum any moist or liquid substances. Never immerse the appliance in water.
• Unplug the appliance form the mains supply socket after use and before every cleaning. Pull the plug, not the mains cable, in order to disconnect the appli-
ance from the mains.
• Do not put any object into openings. Do not use with any opening blocked. Keep free of dust, lint, hair etc.
• Do not use the vacuum cleaner without dust container or dust filter in place.
• Do not vacuum any flour, cement etc., in order to avoid the overloads.
• The appliance should only be cleaned with a dry or damp cloth; it should never be immersed in water. Do not use any solvents for cleaning.
• This appliance is intended for domestic use only and not for commercial applications.
• Do not use the mains wire to carry the appliance. Do not pull the mains wire over sharp edges.
WARNING! Do not use the appliance if the filter is not installed! Do not used other filters except the ones(fire prevention filter) attached to the appli-
ance by manufacturer.

Technical Data

Voltage/Frequency:
Power:
Vacuum:
Capacity:
Hose:
Noise:
VDE Cord Length:
Aditional Specifications:
Operating Instructions
- Fit the fire prevention filter on the bottom of container cover, the filter should be took out and brush dust after lengthy use.
- Connect tightly enter Connector and tube with two ends of hose.
- Put tube into fireplace or stove to vacuum ash.
- Connect the plug to the socket
- Switching on: set the switch to " I "
- Switching off: set the switch to "O"
- Move the suction tube pipe with light pressure slowly and evenly over the dirt.

Maintenance and care

- Stop the cleaner.
- Disconnect the mains plug from the power supply.
- Disconnect hose, tube and container apart.
- Clean connectors, hose and tube and keep them unblocked.
- Use a damp cloth to clean the plastic parts.
- Empty container, tap the deposits to loosen them.
- Brush dust on fire prevention filter.
- Do not use cleaning products, solvents or sharp objects for this purpose.
Repairs
Only use accessories and spare parts recommended by the manufacturer. If the equipment should fail some day in spite of our quality controls and your main-
tenance, only have it repaired by an authorized electrician.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the en-
vironment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product
for environmental safe recycling.
3
230V/50Hz
1400W
>17Kpa
20Lt
Φ32mm
80db
4m
• Fireproof Filter
• Filter Cleaning System
• Blower Function
WWW.BORMANNTOOLS.COM
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance
and safety of the products. The parts described / illustrated in the pages of the manual that
you hold in your hands may also concern other models of the manufacturer's product line with
similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or indus-
trial applications. Our warranty will be voided if the machine is used in commercial, trade or
industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspec-
tion, repair or replacement work, including maintenance and special adjustments, must only be
carried out by technicians of the authorized service department of the manufacturer.

Advertisement

loading

This manual is also suitable for:

036265