Troubleshooting - Fein Dustex 35LX Manual

Dustex 35LX; Dustex 35LX AC; Dustex 35MX; Dustex 35MX AC

Troubleshooting

Fault
Suction turbine does not run
Suction turbine switches off
Suction turbine does not restart after emptying
the container
C-SC_CSSM Version 1.0
Remedy
• Check the power cable, plug, fuse, socket and fill level sensors
Operating mode selector switch is set to "Automatic Start/Stop"
• Set the operating mode selector switch to the "Suction" symbol
• Switch on the power tool that is connected to the socket
• Check the appliance switch and replace if necessary
• Check the socket
• Check the control board and replace if necessary
Container is full in wet operation
• Empty container
• Empty container
• Clean the fill level sensors and the space between the fill level sensors with a
brush
2017-01-19 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 1 of 6