Problem Solving Guide - Miele PWM 514 Operating And Installation Instructions

Commercial washing machine
Hide thumbs Also See for PWM 514:
Table of Contents

Advertisement

Problem solving guide

Opening the door
in an emergency in
case of a power
cut
32
Power cut during the washing process
Switch the machine off.
Switch off at the on-site mains electricity switch.
Close the supply valves for water or steam, depending on heating
type.
To remove the laundry, first the drain valve must be opened
manually and then the drum door manually unlocked.
Guide the T 40 Torx wrench for the emergency door release through
the eye on the front of the machine.
Open the drain valve by pulling the eye using the Torx wrench.
Keep pulling the eye until the suds have drained away completely.
The suds will drain away.
The emergency drain closes automatically when the Torx wrench is
removed from the eye.
Push the eye back in as far as it will go.
The drum door cannot be opened.
 Warning! Danger from rotating drum and danger of scalding.
Before inserting the Torx wrench, make sure that the machine is
disconnected from the electricity supply, the drum has stopped
and there is no water in the machine.

Advertisement

Table of Contents
loading

Table of Contents