Safety - Husqvarna 522HS75X Operator's Manual

Symbols on the product
Stop.
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Idle adjustment screw.
High speed needle.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
905 - 002 - 01.07.2022
Used if there is a risk of
Used if there is a risk of
Low speed needle.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 13 and on the label.
The product agrees with the applicable
EC directives.
This product conforms to applicable UK
regulations.
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
Euro V Emissions
WARNING:
voids the EU type-approval of this product.

Safety

Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product.
• Incorrect or careless use of the product can turn
it into a dangerous tool that can cause serious or
even fatal injury. It is extremely important that you
read and understand the contents of this operator's
manual.
• This product produces an electromagnetic field
during operation. This field may under some
The rating plate shows serial number.
yyyy is the production year and ww is
the production week.
Tampering with the engine
Read the warning
Technical
3