Klarstein NEW BREEZE ECO 10032511 Manual page 38

EN
38
9 TEMP / Temperature setting
Press this button to show the set temperature, indoor temperature or outdoor temperature
on the display.
no display
No display
no display
• Selection of no display on the remote control: display of the set temperature.
no display
• Selection of on the remote control: display of the internal temperature.
• Selection of on the remote control: display of the outside temperature.
Note: On some models, the outside temperature cannot be displayed. Display only
for models with a two-digit display.
12 TURBO
Pressing this button turns the turbo on or off. The appliance reaches the set temperature
in the fastest way. In cooling or heating mode, the fan blows at high speed.
13 Ventilation mode (X-FAN)
After pressing this button in cooling mode and dehumidifying mode, the display shows
and the fan runs for 2 minutes to dry the indoor unit. Once the unit is switched on,
ventilation mode is automatically activated. The function is not available in automatic
mode, ventilation mode and heating mode.
14 Light
Use this button to turn off the light of the remote control display. The light symbol
disappears. Press the button again to switch the light back on. The light symbol appears
again.
15 WiFi (wireless)
Turn WiFi on and off. When WiFi is on, the WiFi icon appears on the remote
control display. When the power is off, press and hold the MODE and Wifi buttons
simultaneously for 1 second to restore the WLAN module to its factory default settings.