Terminal Box Wiring Instructions
Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
4-Ø9 HOLES
Bulb Replacement Instructions/ Xenon Bulb Replacement lnstructions
■ Bulb Replacement Instructions(SNE only)
Assemble
bulb
• Please wait at least 1 minute after turning off the power
before replacing the bulb.
• In order to dissemble the bulb, please push down the bulb( ① )
lightly and screw it counterclockwise.
• In order to put the bulb in to the unit, please place the bulb( ① )
in the socket( ② ) and screw it clockwise while lightly pushing
down the bulb.
Installation Environment and Protection Rating
• This product is designed to be explosion proof.
• Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.
• For further information, please visit our website (www.qlight.com).
• Terminal block is located inside of the product. Unscrew the 4 bolts located in the upper
body to get rid of the upper lighting element of the unit.
①
• Please apply fork (U-type) or ring (O-type) locking spade terminal at naked tip of the wire
for secure connection.
• Please wire the power line to terminal ①
• For AC type products, wire regardless of polarity.
• For DC type products, wire terminal of black line to (-) polarity.
• External power line - UL1015 AWG18(0.75sq) x 2C 400mm
①
②
Disassemble
bulb
Grounding Instructions
Please use an M4 bolt at the location marked in the diagram
•
above to ground the product.
When connecting the grounding cable, please use a ring terminal.
•
• Please use a grounding cable with a diameter greater than 4mm.
■ Xenon Bulb Replacement Instructions(SNE-S only)
Disassemble
xenon bulb
• Please wait at least 30 mimutes after turning off the power before
replacing the xenon bulb.
• Please pull out the entire xenon bulb structure ① to disassemble.
• For xenon bulb assembly, please ensure the connector portion of
the xenon bulb structure matches the pin location ②.
4
M4 ground contact part
①
Assemble
xenon bulb
②