Advertisement
Dimensions
CABLE ENTRY
NPT 1/2''
Parts Definition/ Installation/ Light Function Selection
■ Parts Definition
Protection cage
(STS316L)
Lens (Tempered glass)
Housing(Al)
Terminal cover(Al)
①
■ Installation
• First, machine taps or holes on the mounting surface ① .
• The mounting hole of this product is 8mm in diameter.
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
SNE/ SNEL/ SNELR/ SNE-S
Ø152
3
182.5
107
4-Ø8 FITTING HOLES
114
■ Light Function Selection(SNEL only)
• •
Please refer to the chart below to use light function
selection switch located inside the product.
▶L : Steady
• Default function is set at steady LED. Select the desired function
for your application during installation.
(Units : mm)
▶LF : Flashing
Advertisement
