Operating the appliance
en
Switch the appliance on again if
necessary. The ® and î symbols will
flash. If the symbols are off, the door
can be opened.
Programme end during rinse
hold
The ‹ indicator flashes in the display
panel, and the preset spin speed and
remaining programme length are
displayed for the selected programme.
Continue the programme by:
Touching ‹ on the control panel or
■
Changing the spin speed and then
■
touching ‹ or
Selecting the Less iron S setting
■
and then touching ‹ or
Turning the programme selector to
■
p Empty and then touching ‹.
Programme end
End lights up in the display panel and
the ‹ and ® displays are off.
If the ä display flashes, this
Note:
informs you to run the ä Drum Clean
î programme or any other programme
at a washing temperature of at least
60 °C.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry.
Switch off the appliance.
2.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
34
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber gasket dry.
■
Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.
Always wait for the end of the
■
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.