How To Remove Parts - Hitachi R-S51AMJ How To Use Manual

HOW TO REMOVE PARTS

Vacuum Case with the door
● Pull the door, lift the case
at the edge of it lightly,
and then pull it out.
For more information.
Pg.42, 43
● Draw the shelf, and pull off
the two pins on the lower
right and remove it.
Slightly lift up the back
1
of the shelf and draw it.
● Draw the door fully and lift up the case towards you.
Put the case bottom on the frame and set the case.
Draw the door fully, and draw the Slimline slide case and the Slide case
1
respectively.
1
● Draw the door fully and pull
up the Spacious vegetable
case as shown in the fi gure.
■ How to install the slide door
Ice Compartment/Upper Freezer
50
Fixed shelf
Height adjustable shelf・Lower shelf
Raise the shelf as shown in fi gure, and
2
turn it and remove it.
Ice Compartment/ Upper Freezer
When installing it, insert the pins on the left/right of
the Lower freezer case into the square holes on the
frame to install it.
Moreover, hitch the pins on the left/right of the Slide
case to the outside of the Lower freezer case.
Pin
Vegetable Compartment
2
● Lift up the front part of
the door, and draw it
further and incline it.
Frame
● Lift up the door pocket while
tapping the left/right of its
bottom surface, and remove it.
Insert the door pocket fully to the
end when installing it
● Slightly lift up and pull out.
Lower Freezer
3
● Lift up the Vegetable Case.
● When installing it, insert the pins on the left/right
inner sides of the Vegetable Case into the square
holes on the frame, and put the edge of the
Vegetable Case on the frame to install it.
Vegetable Compartment/Lower Freezer
Door pocket
Reversible shelf
When installing the shelf, slide it until
it reaches to the interior wall, then
slightly lift up the back of the shelf and
push it in. (hitch the forks of the shelf
to the parts on the back of the shelf)
Door may damage if drawing
Caution
the shelf without turning it.
Lift up the Lower
2
freezer case.
Frame
Tap
Tap
Frame