Basic Settings; Overview Of Basic Settings - Bosch SMS6HCB01A User Manual

15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Rinse aid dis-
pensing
Sensor setting
Extra Dry
Hot water
1
Factory setting (may vary according to model)
Display text Selection
1
r:05 r:00 - r:06
1
SE:00 SE:00 - SE:02
1
d:00 d:00 - d:01
1
A:00 A:00 - A:01
Basic settings aus
Description
Set the amount of rinse aid
to be dispensed.
→ "Setting the amount of
rinse aid", Page 29
Switch the rinse aid system
off with level r:00.
Set the water sensor for
identifying soiling.
→ "Sensors", Page 12
The temperature is in-
creased during the final
rinse, which improves the
drying result. This may in-
crease the run time slightly.
Note: Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d:01"
or off "d:00".
Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this
can be prepared with little
energy and a suitable install-
ation is available, e.g. solar
heating system with circula-
tion line. The water temperat-
ure should be at least 40 °C
and max. 60 °C.
Switch hot water on "A:01"
or off "A:00".
37