Cleaning The Surface Of The Filter - Philips AC3858/86 User Manual

2 3
1
Switch off the air purifier and unplug from the power socket.
2
Pull the back cover and remove it from the appliance.
3
Clean the particle sensor with a damp cotton swab.
4
Dry all parts thoroughly with a dry cotton swab.
5
Reattach the back cover.
Cleaning.the.surface.of.the.filter
IAI
Gas
PM2.5
2
1 Switch off the air purifier and unplug from the power socket.
2 3
2
Pull the back cover and remove it from the appliance.
3
Pull the filter from the appliance.
4
Clean the surface of the filter with a vacuum cleaner cleaner.
5 Put the filter back into the appliance.
6
Reattach the back cover.
7
Put the plug of the air purifier in the power socket.
8
Touch the button to switch on the appliance.
9
Touch and hold the filter status check/reset button
reset the filter cleaning time.
The screen displays a message "Filter cleaning completed".
»
10 Wash your hands thoroughly after cleaning the filter.
5
Filter.alert.light.status
Clean surface
of lter and
long press
The filter cleaning alert
to reset.
displays on the screen.
4
for 3 seconds to
Action
Clean the surface
of the filter with a
vacuum cleaner.
5 6
Filter
cleaning completed.
EN
13