Creating Connections - Cisco GigaStack WS-X3500-XL Hardware Installation Manual

Creating Connections

Figure 2-5 Inserting the Cable in a GigaStack GBIC
1 2
1
GigaStack cable
Note
Creating Connections
Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide
2-8
2
GBIC module slots
Always use a GigaStack cable to connect a GigaStack GBIC to any device. For
more information, see the
You can create these configurations:
Point-to-point
•
• Cascaded stack
Cascaded stack with a redundant link
•
In a point-to-point configuration or cascaded stack configuration, the GigaStack
GBIC can use the ports listed in
"GigaStack GBIC Cabling" section on page
Table 2-1 to connect to other devices.
Chapter 2 Installation
B-1.
78-6460-04