Minimum Ios Release For Redundant Loop Configurations - Cisco GigaStack WS-X3500-XL Hardware Installation Manual

Chapter 1 Overview
Switch Series or Module
Catalyst 3500 XL switches
Catalyst 3550 switches
1. The 1000BASE-X module provides one switched 1000-Mbps port in half-duplex, full-duplex, or autonegotiation mode for a
GigaStack GBIC. The port supports the IEEE 802.3Z 1000BASE-X standard.
Minimum IOS Release for Redundant Loop
Configurations
78-6460-04
Model Number
Catalyst 3508G XL
Catalyst 3512 XL
Catalyst 3524 XL
Catalyst 3524 PWR XL
Catalyst 3548 XL
Catalyst 3550-12G
Catalyst 3550-12T
Catalyst 3550-24-SMI
Catalyst 3550-24-EMI
Catalyst 3550-48-SMI
Catalyst 3550-48-EMI
To ensure support for redundant loop configurations when using the GigaStack
GBIC in a cascaded stack configuration, make sure that every switch in the stack
is running at least the minimum IOS Release listed in
Catalyst GigaStack Gigabit Interface Converter Hardware Installation Guide

Minimum IOS Release for Redundant Loop Configurations

Description
8 GBIC module slots
12 autosensing 10/100 Ethernet
ports and 2 GBIC module slots
24 autosensing 10/100 Ethernet
ports and 2 GBIC module slots
24 autosensing 10/100
inline-power Ethernet ports and
2 GBIC module slots
48 autosensing 10/100 Ethernet
ports and 2 GBIC module slots
2 autosensing 10/100/1000
Ethernet ports and 10 GBIC
module slots
10 autosensing 10/100/1000
Ethernet ports and 2 GBIC
module slots
24 autosensing 10/100 Ethernet
ports and 2 GBIC module slots
48 autosensing 10/100 Ethernet
ports and 2 GBIC module slots
Table 1-5.
1-7