TypeS MICRO LIGHT KIT Instruction Manual page 2

POWER
1) 12V Plug-in Power Adapter
12V Power Adapter
Plugs into any 12V power socket and
press the ON/OFF switch to turn on.
2) Connecting 3-Pod Wires
i) Connect the 3-Pod Wires with the
12V Power Adapter as shown below.
ii) Use arrow indication to match the
correct direction.
Light will ONLY work when
power arrows are aligned
as shown below.
3-Pod Wire
WARNING: do not install or use product if it, in any
way, impairs the safe operation of your vehicle.
Follow manufacturer's instructions to ensure the
product is properly & safely installed. Neither the
manufacturer nor the reseller can be held
responsible or liable for consequential, incidental,
or indirect damages to either person or property
resulting from the installation or improper use of
this product. Check your state or provincial laws
before installing.
This product is not DOT approved and is designed
for intended use only (for interior cabin). Not for use
in extreme temperature such as under hood
applications.
WARNING: This product can expose you to
chemicals including DEHP and DINP, which are
known to the State of California to cause cancer
and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov.
Have a comment or question?
Email us at: info@typesauto.com
or visit us online at: www.typesauto.com
Winplus North America, Inc.
2975 Red Hill Ave., Ste. 100,
Costa Mesa, CA 92626
Tel: 1.866.294.9244
© 2019 Winplus North America, Inc.
All rights reserved.
12V Power
3M™ is a trademark of 3M Company.
Adapter
WARNING OPTIONAL PRODUCTS
Optional Smart LED products also available
to enhance your experience (sold separately).
48" Smart Lighting Deluxe Kit
(LM55369)
72" Exterior Smart Lighting Kit
(LM55878)
ML-57504_V1