Bertazzoni Master Series Installation Manual page 33

NOTE:
The niche must be designed to accommodate
the minimum depth requirement plus the
thicker door panel, if desired. Regardless
of door thickness, the maximum panel
weights must always be respected, or the
product warranty will be void.
SCREWING IN THE SIDE BRACKETS
• Attach the side brackets to the cabinet using 12
screws (#11) for each bracket.
• Mount the brackets (#17) on the unit, with 2 on
the top and 3 on each side. Use screws (#18) to
tighten them in place.
• Use 12 long screws (#16) to join the unit to the
cabinet.
WARNING:
Before screwing the side brackets into the
cabinet gables, ensure the screw is shorter
than the gable thickness, otherwise the
finished side may be damaged.
Before beginning to screw on the side and
upper brackets, make sure that the unit is
connected to power,that water (if applicable)
is being supplied to the appliance and that
the water connection has been tested for
leaks.
NOTE:
Drilling a pilot hole in the side gable for
reference could make the mounting process
easier.
SECURING THE UPPER BRACKET
• Attach the upper bracket to the cabinet using 4
screws (#16).
NOTE:
Drilling a pilot hole in the side gable for
reference could make the mounting process
easier.
EN
33