Canon varioPRINT 135 Series Operation Manual page 47

Work with the Workflow Profiles
Setting
[Check first set]
[Next output tray] [After each job]
[Offset stacking]
46 Chapter 4 - Adapt Printer Settings to Your Needs
Values Effect
[On] The machine goes on hold after the first set of a job is
printed. You can check the quality and layout of the first
set before the machine prints the remaining sets.
[Off] The machine will print the whole job without stopping
after the first set.
[As in job] The machine will print the jobs as indicated in the job
ticket.
Each job is sent to the next available output tray. In this
context, the second stack of the stacker is also defined
as an output tray.
[When tray is full] All the jobs are stacked until an output tray is full. When
an output tray is full, the next jobs are sent to the next
output tray.
[Jobs] Each printed job that is delivered to an output location is
stacked on top of the previous printed job with an offset.
This helps you to identify the various jobs.
[Sets (always)] Each printed set that is delivered to an output location is
stacked on top of the previous set with an offset. This
helps you to identify the various sets.
[Sets (as in job)] Each printed set is delivered to the output location as de-
fined in the job ticket or copy job. Therefore, the sets can
be stacked in one straight line or with an offset.
[Banners] Each banner page of a job is delivered to the output lo-
cation with an offset. This helps you to identify the sepa-
rate jobs. The jobs themselves are stacked in one
straight line.
[Off] All the printed jobs or sets are stacked in one straight
line. There is no offset between the jobs or sets.
Canon varioPRINT 135 Series