Configure The Settings For The Ldap Server - Canon varioPRINT 135 Series Operation Manual

Configure the Settings for the LDAP Server

Introduction
If the scan-to-email function is enabled, a list of user codes and matching email addresses is
required. When a user enters his/her unique code on the control panel, the scan job will be sent
to the matching email address.
The list of user codes and matching email addresses can be available at the following places:
• On an LDAP server, if available
• If an LDAP server is unavailable, in an address list file (default name: ral.csv), which must be
uploaded to the PRISMAsync controller through the Settings Editor ([Configuration] ->
[Connectivity]).
When a user enters the user code, the system will first look for a matching email address in the
LDAP database. When the system does not find a matching email address there, or when an
LDAP server is not available, the system will search the address list file (ral.csv) for the matching
email address.
How to Configure the Settings for the LDAP Server
The table below describes the settings that the system administrator must configure in the
Settings Editor.
Settings for LDAP in the Settings Editor
Setting
[Connection test]
[Enabled]
[Host name / IP address]
[Port]
[User name]
[Password]
[Search database]
[User identification]
[Email address attribute]
Canon varioPRINT 135 Series
Configure the Settings for the LDAP Server
Description
Click [Connection test] to check if the connection to the
LDAP server works correctly.
This setting must be set to [Yes] to realize a connection
between the printer and the LDAP server.
The name or IP address of the LDAP server where user
information for scan to email can be retrieved.
The TCP port number of the LDAP server. The default
value is 389.
The user name that is used to access the LDAP server.
The password that corresponds with the user name.
The path to the LDAP directory that contains the user
identifiers, for example o=YourOrganization.
The type of user identification that must be searched for,
for example a telephone number or employee ID.
The LDAP attribute that contains the email address of
the user, for example 'mail'.
Chapter 8 - Carry Out Scan Jobs 253