Canon varioPRINT 135 Series Operation Manual page 136

[Cover]
Setting
[Cover]
Canon varioPRINT 135 Series
Description of the Print Job Settings that You Can Change on the Control Panel
Values
[Front]
[Media]
[Print sides]
[Back]
[Media]
[Print sides]
Description
Touch the button to toggle between [On] and
[Off]. When [Front] is [On] then the [Media]
setting below [Front] becomes enabled.
When [Front] is [On], you can select a media
from the media catalog to use as front cover.
When [Front] is [On], you can indicate which
side of the front cover must be printed. You
can select.
• [Both sides]
• [Front side]
• [Back side]
• [None]
Touch the button to toggle between [On] and
[Off]. When [Back] is [On] then the [Media] set-
ting below [Back] becomes enabled.
When [Back] is [On], you can select a media
from the media catalogue to use as back cover.
When [Back] is [On], you can indicate which
side of the back cover must be printed. You
can select:
• [Both sides]
• [Front side]
• [Back side]
• [None]
Chapter 6 - Carry Out Print Jobs 135