Canon varioPRINT 135 Series Operation Manual page 103

Shifted Image
NOTE
If the elongation is too great, the image can become larger than the sheet. In this case the image
is printed over the edges of the sheet.
• Risk of reprinting.
• Risk of system pollution.
Shifted Image
When to do
The image is shifted in the X direction (feed direction) and/or in the Z direction (perpendicular to
the feed direction).
Job
<--
Media Registration
With an image shift, all corners are shifted in the same direction. We assume that the skew is
correct.
Procedure
1. On the verification chart, determine if the image on the back side is shifted or the image on the
front side.
Change the back side if the image on the back side is shifted.
Change the front side if the image on the front side is shifted.
2.
On the verification chart, use an accurate ruler to measure the distance that the image is shifted
in the feed direction (X) and in the direction perpendicular to the feed direction (Z).
• Measure the distance between the top-left corner on the front side and the back side in the
feed direction.
• Measure the distance for all the corners in the feed direction.
102 Chapter 5 - Media Handling
Verification chart
Feed direction
Canon varioPRINT 135 Series