Replace The Staple Cartridge Of The Stapler Unit - Canon varioPRINT 135 Series Operation Manual

Replace the Staple Cartridge of the Stapler Unit

Introduction
When a staple cartridge of the stapler unit inside the stacker/stapler is empty, the control panel
will display a message indicating which staple cartridge must be replaced. The procedure below
describes how to replace the staple cartridge.
Required tools
Staple N1
Replace the staple cartridge of the stapler unit
Step Action
1 Open the front door of the stacker/stapler.
2 Grab the green tab of the staple case and
pull the staple case out of the staple unit.
3 Pull out the staple cartridge.
4 Insert the new staple cartridge (Staple
N1).
Canon varioPRINT 135 Series
NOTE
When the stapler unit is at the
back and it is difficult to pull out
the staple case, turn the dial at
the bottom left-hand side to the
left to move the stapler unit.
Replace the Staple Cartridge of the Stapler Unit
Illustration
Chapter 16 - Add Toner and Staples
4
355