Canon VarioPrint 6000 Series Operation Manual page 337

Other
Item
Input capacity per paper module
Output capacity per output location
Supported media sizes per output lo-
cation
Stapling capacity
Online finishing (external finisher)
VarioPrint 6000 line
Specification
• Normal trays 1 and 2:
600 sheets each
• Bulk trays 3 and 4:
1,700 sheets each (or 3,400 A4/Letter sheets each
when the optional dual paper trays are installed; Left-
hand stack 1,800 A4/Letter sheets, right-hand stack
1,600 A4/Letter sheets)
• Flex-XL trays in the Flex-XL PIM paper input module:
1,650 sheets each
• Stacker:
6,000 sheets in 2 stacks of 3,000 sheets each
• Finisher:
Finisher tray. The finisher tray consist of 3 physical
trays. You cannot address these physical trays sepa-
rately as an output location.
• Top tray: 900 sheets (A4/Letter)
• Middle tray: 1,000 sheets (A4/Letter)
• Lower tray: 1,800 sheets (A4/Letter)
Upper output: 500 sheets (all sizes)
• Stacker:
All media sizes between 203 mm x 203 mm and 320
mm x 488 mm
When the Flex-XL PIM paper input module is installed:
• all media sizes between 203 mm x 203 mm and 350
mm x 500 mm
• Finisher:
Long edge: 10.8 - 12.04 inches
Short edge: 208 mm - 220 mm
• Finisher: 100 sheets
Via DFD2 interface
Product specifications
Chapter 15 - Specifications 337