Select More Than One Job For Printing - Canon VarioPrint 6000 Series Operation Manual

Select more than one job for printing

Select more than one job for printing
Introduction
The table below describes the possibilities to select more than one job for printing.
Select more jobs
Options
Select two or more jobs
manually
[Select] button - [All]
[Select] button - [Jobs with
loaded media]
[Select] button - [Job label] A label is a name or tag that helps you to identify certain jobs on
[Select] button - [Invert se-
lection]
Procedure
1. On the control panel, touch [Jobs] -> [Queues].
2. If collapsed, first touch
3. Touch the jobs you want to print one by one, or make a selection using the [Select] button.
The selected jobs are highlighted.
4. Press [Print].
200 Chapter 9 - Carry out print jobs
Description
Touch the jobs you want to print one by one.
All jobs in the list of [Waiting jobs] are printed. The order in the list
of [Waiting jobs] determines the print order. However, in the list of
[Scheduled jobs] you can give priority to a job.
All jobs for which the required media are currently available in the
paper trays, will be printed. This improves the productivity, be-
cause you must not change the required media during printing.
You may only need to add more of the currently available media
types.
the control panel. When a job is sent to the printer, the person
who submits the job can add a label to that job. The label can be
any name that helps to identify certain jobs. The label can be de-
fined in the printer driver, in a job ticket or via an automated work-
flow. When the label in the printer driver is identical to a defined
automated workflow, then the print job will be printed with the
settings of this automated workflow. For example, the label 'Cus-
tomer XYZ' can be added to jobs. Then you can select and print all
the jobs for 'Customer XYZ' at once.
Invert the current selection.
to expand the list of [Waiting jobs], or go to a DocBox.
VarioPrint 6000 line