Select Another Media For A Job - Canon VarioPrint 6000 Series Operation Manual

Select another media for a job

Introduction
If you want to print a job on other media than originally defined for that job, you can select a
different media via the operator panel. Requirements regarding the new media:
• The media must be available in the media catalog.
• The media must have the same size as the original media.
NOTE
You cannot change this setting for the active print job .
Procedure
1. On the control panel, touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs], or select a
DocBox.
2. Touch the job you want to change.
3. Touch [Edit], or double-tap the job to open the [Edit] window.
4. In the preview pane at the right-hand side, touch the media you want to change.
When more than one media was defined for a job, the preview pane displays a separate button
for each media.
5. From the list, select the new media.
6. Touch [OK].
VarioPrint 6000 line
Select another media for a job
Chapter 9 - Carry out print jobs 183