Canon VarioPrint 6000 Series Operation Manual page 283

Action
3 Take a new stack of media for loading.
Load the media with the grain direction in the
transport direction.
Carefully put the stack in the middle of the pa-
per tray, aligned against the left-hand guide
plate.
Check the stack after loading. Remove sheets
that are shifted or curled during loading.
4 Move the sliders carefully to the stack.
5 Unpack the following ream of media.
Carefully put the new stack on the already loa-
ded stack without adjusting the sliders.
Check the stack after loading. Remove sheets
that are shifted or curled during loading.
VarioPrint 6000 line
Load light-weight media into the paper module
Slowly turn the knob clockwise until the
side sliders touch the stack without dam-
aging it.
Squeeze the green handle of the front
slider to move the trailer-edge sliders
carefully against the stack without dam-
aging it.
Chapter 11 - Media handling
4
283