Advertisement
Quick Links
Part List
A.
Top
1 pc.
I.
Front Rail
1 pc.
G.
H.
Back Upright
Back Rail
2 pcs.
1 pc.
O.
P.
Door
Door
1 pc.
1 pc.
Hardware List
Caster
2 Locking
2 Non-Locking
Small Hex Wrench
4 pcs.
1 pc.
Tool(s) required for assembly: Phillips screwdriver
home
508 95
6-
Kitchen Cart
B.
Side Panel
1 pc.
K.
Base
1 pc.
R.
Rack Side
1 pc.
Q.
T.
Gate Leg
Rack Base
1 pc.
1 pc.
Hex Wrench
Cam Lock
1 pc.
4 pcs. (+2 extra)
Cam Lock Screw
4 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,
servicedesk@homestylesfurniture.com,
C.
D.
Side Panel
Middle Panel
1 pc.
1 pc.
J.
Front Rail
3 pcs.
S.
Rack Side
1 pc.
U.
V.
Pipe
Drawer
3 pcs.
3 pcs.
M6x35
M3.5x25
Wood Screw (long)
Head Cap Bolt
14 pcs. (+1 extra)
32 pcs. (+1 extra)
M4x16
M3.5x13
Wood Screw
Wood Screw (short)
22 pcs. (+1 extra)
24 pcs. (+1 extra)
E.
Middle Panel
1 pc.
M.
Arm Handle
2 pcs.
L.
Shelf
2 pcs.
W.
Drawer
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
Wood Plug
10 pcs. (+2 extra)
Adjustable Pin
8 pcs. (+1 extra)
888-680-7460
F.
Back Panel
3 pcs.
N.
Arm
1 pc.
M4x25
Machine Screw
12 pcs.
Handle
6 pcs.
Advertisement
Related Manuals for Home Styles 5086-95
Summary of Contents for Home Styles 5086-95
- Page 1 508 95 Kitchen Cart Part List 1 pc. Front Rail Side Panel Side Panel Middle Panel Middle Panel Back Panel 1 pc. 1 pc. 1 pc. 3 pcs. 1 pc. 1 pc. Back Upright Back Rail Base Front Rail Arm Handle 1 pc.
- Page 2 Assembly Instructions 2/9 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ Keep Hex Wrench as the bolts may need to be tightened in the future.
- Page 3 Assembly Instructions 3/9 Head Cap Bolt Arrow label at front STEP 3 Attach Back Rail ( ) and Front Rail ( ) to unit with Head Cap Bolts. Note: Arrow label indicates front of Back Rail ( ). Attach Side Panel ( ) to unit with Head Cap Bolts.
- Page 4 Assembly Instructions 4/9 Head Cap Bolt Figure 3 Figure 4 STEP 5 Turn unit over to its upright position. Attach Rack Side (R) to unit with Head Cap Bolt. (See Figure 3) Slide Rack Base (T) and Pipes (U) into Rack Side (R). Attach Rack Side (S) to unit with Head Cap Bolt.
- Page 5 Assembly Instructions 5/9 STEP 6 Attach Gate Leg (Q) to back of unit with Wood Screws into pre-drilled holes. (See Figure 5) Figure 5 Wood Screw STEP 7 Adjustable Pin Handle Machine Screw Insert Adjustable Pins into side panels and middle panels at desired level.
- Page 6 Assembly Instructions 6/9 Drawer ( ) V Wood Screw (long) Bottom STEP 8 Attach Drawer Front ( 1) and Drawer Back ( 2) to Drawer Side ( 3) with Wood Screws (long). Attach Drawer Side ( 4) to unit Roller at back with Wood Screws (long).
- Page 7 Assembly Instructions 7/9 Drawer ( ) Wood Screw (long) Bottom STEP 11 Attach Drawer Front ( 1) and Drawer Back ( 2) to Drawer Side ( 3) with Wood Screws (long). Attach Drawer Side ( 4) to unit Roller at back with Wood Screws (long).
- Page 8 Assembly Instructions 8/9 STEP 14 Cam Lock Screw Place Top (A) upside down on a soft cloth. Insert Cam Lock Screws into pre-drilled holes in Top (A), then tighten. (See Figure 9) Figure 9 Figure 10 Cam Lock STEP 15 Attach Top (A) to unit with Cam Locks.
- Page 9 Assembly Instructions / 9 9 Wood Plug STEP 16 Cover all holes with Wood Plugs. (See Figure 11) Figure 11...
- Page 10 Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer, home styles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
Need help?
Do you have a question about the 5086-95 and is the answer not in the manual?
Questions and answers