Apogee MC-100 Quick Start Manual
Hide thumbs
Also See for MC-100:
- Owner's manual (22 pages) ,
- Owner's manual (23 pages) ,
- Installing manual (7 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Apogee MC-100
Summary of Contents for Apogee MC-100
- Page 1 Installing New Coefficients on Your MC-100...
- Page 2 1. On the chlorophyll support page, click on the New Coefficients 2. Click the zip file link for whatever coefficients you want to bookmark. download. 3. Connect the meter to your computer using the microUSB-to-USB 4. Turn the meter on and press the Data button. The meter should cable (included with your meter).
- Page 3 5. On your computer, go to the location of the downloaded 6. Select the extracted files and copy them. coefficients zip files and extract its contents. 7. Navigate to and open the MC-100’s file directory. 8. Paste the copied coefficient files in to the MC-100’s memory.
- Page 4 Confirming and Selecting New Custom Units...
- Page 5 1. Press the Eject button and disconnect the USB cable. 2. From the Home menu, press the Run button to access the Test menu. 3. Press the Setup button to access the MC-100 Test Setup menu. 4. Press the up button to reach the Custom Measurement menu.
- Page 6 5. Press the Edit button. Make sure the unit’s heading is set to “Yes”. 6. Press the right arrow button to go to the Unit Selection menu. 7. Scroll through the selections of units to confirm your new 8. Highlight a coefficient and press the Accept button to begin using the coefficient.
Need help?
Do you have a question about the MC-100 and is the answer not in the manual?
Questions and answers