Table of Contents
Advertisement
INSTALLATION
Warning: Leave the unit to stand for 12 hours before connecting to the mains electricity supply
after transport or when it has been tilted (e.g. cleaning), to allow the coolant gases time to settle.
Unpacking
• Open the box and remove all of the packaging and the exhaust assembly
• Grip the unit by the carry handles located on either side and carefully lift until it slides out of
the foam base
• Install the exhaust hose assembly onto the unit before switching on
Installing Exhaust Hose
Extend the side of hose
Extend the exhaust hose by pulling out the two ends of
the hose.
Fig.1
Screw the exhaust hose into the exhaust hose
connector, turning anti-clockwise.
Fig.2
Screw the other end of the exhaust hose onto the
exhaust hose adaptor.
Fig.3
Insert
Slide the exhaust hose assembly into the exhaust duct
located on the back of the unit, ensuring the connector
has clicked into place.
Fig.4
7
Advertisement
Table of Contents
