Moen Smart Sump Pump Monitor Manual page 13

Status LED Light Color and/or
Audible Tone
LED is blinking Amber and Blue.
LED is solid Green.
LED is solid Yellow.
LED is blinking Yellow (half a
second on, then 9 and a half
seconds off).
LED is blinking Yellow: 1 second
on, then 4 seconds off.
Beeper: Beeps in a low pitch
tone for 0.5 second, then off for
600 seconds.
LED is blinking Yellow: 1 second
on, then 1 second off.
Beeper: Beeps in a low pitch
tone for 0.5 second, then off for
600 seconds.
LED is Blinking White.
LED is blinking Red, half second
on, then half second off.
Beep is constant.
LED is blinking Red, half second
on, then half second off.
Beeper: Beeps in a high pitch
tone for 0.5 second, then off for
3 seconds.
LED is blinking Red, 1 second
on, then 1 second off.
Beeper: Beeps in a high pitch
tone for 0.5 second, then off for
3 seconds
LED is blinking Red, 1 second
on, then 1 second off.
MONITOR LIGHT DESCRIPTIONS
Probable Cause(s)
The device is broadcasting a network in an attempt to
configure with your mobile device
Device connected to your network.
Device is not able to connect with your network.
Device is running on battery power.
Battery power low.
Battery dead.
The device is in the process of upgrading to the latest
software.
Water in the sump basin is above overflow water level or
water detected by leak sensor.
Water in the sump basin is above high water level.
Failed to read water level from smart water level sensor.
Water in the sump basin is above high water level.
Failed to read water level from smart water level sensor.
None.
None.
Check network connection.
Check main power source.
Replace battery when convenient.
Replace battery to ensure proper operation.
None.
Take immediate action.
If a battery backup sump pump is installed, the backup
should be running. If not, take immediate action.
Check connection.
If a battery backup sump pump is installed, the backup
should be running. If not, take immediate action.
Check connection.
13
INS11985 - 10/21
Recommended Action(s)